DIY: How Can You Fix A Window Air Conditioner That Propels Hot Wafts?


When compared with room AC, a window air conditioner is relatively smaller and compact in design. However, the packed in proposal doesn’t alter in mechanism and functioning.

Every now and then, you might notice that the window AC puts an end to cool breeze and directly transfers the hot wind spanks from outside.

hays nyc

If you think that professional assistance will be best, we suggest you check the following tips below to know how a window AC repair NYC can easily be handled by you.

Step 1: Removing and Arranging the AC

At the outset, take out the AC from the window and securely place it in an open space where you can unbolt the whole machine. A sturdy table will be a perfect resting for placing the bulky AC.

For this step, you will have to unfasten screws and might require a screwdriver or wrench. Be careful while unscrewing, keep all the nuts and bolts safely at one place, and keep additional assistance if needed.

Step 2: Clean the AC

Once you disengage the AC, you will notice the electrical machine comprises of several mechanical components. Using the manual, mark out the mesh filter and check whether the whole piece of equipment is in good shape or not. After that, clean the mesh filter with a moist rag, very gently.

You can clean other AC parts by using a solution that has beach and soapy water in equal proportions. With filter, do clean mold growth on grills or other components and let them dry out for some time.

Step 3: Vacuum Clean the Inaccessible Areas

In its compact design, an AC will have several parts and portions that are difficult to get to or can’t be cleaned with soap solution. As a result, you will have to clean these areas with brush and vacuum.

Parts like evaporator coils and condenser coils should be effectively cleared off any dust or dirt. Clean all the parts of the AC thoroughly, leaving out no dirty corners. Also, clean the fans and blades with all supportive side units.

Step 4: Check and Assemble

When satisfied with all the cleaning and vacuuming, check if the AC works as it should.
In case, things don’t seem satisfactory, test if the fins are flatted at the ends and twisted with coils. If not, we suggest, you fix them using a fin comb.

Plug in the AC and you will notice the evident change. Now just place the AC back into its socket and relax under chilling breeze.

Leave a Comment