8 Common Flooring Mistakes to Avoid


Installing flooring in your office or your home shouldn’t be complicated if you do it the right way. Today we share some common mistakes that you should avoid to ensure that your floor installation is a success.

Whether it is an industrial, commercial, or residential project, the installation of flooring indoors and outdoors is a very important part of the construction or renovation process.

By making the right decisions and avoiding common mistakes, you can have peace of mind that your floor not only looks incredible, it also enjoys the best performance and greater durability even receiving heavy traffic.

However, there are some silly mistakes that can ruin this expensive project. Maybe you choose the wrong material or forget to clean the surface before installation. Some flooring mistakes are likely to torment once your flooring is done.

Therefore, avoid falling into any of these eight common problems in flooring installation.

Not choosing the Right Material:

In order to choose an ideal floor, you have to think about the environment of your project, beyond leaving this decision solely to the aesthetic question. 

Among a large amount of parquet, porcelain, ceramic, glass, granite, natural stone, or vinyl tiles, there are differences in characteristics, installation methods, and degrees of resistance. 

Think about the environment and use that the floor will have and select a material that fits your purpose.

Not Choosing the Sufficient material:

Realizing that you don’t have enough material to finish the installation in the middle of the process is frustrating. 

Therefore, add 15% more to the budget to deal with such issues. Also, make sure to check your boxes of material to put aside defective pieces that you will not be able to work with. Having an extra floor box in storage is very useful for future repairs.

Lack of Cleanliness:

It is important to clean the surface on which the floor will be installed.

These surfaces are full of dust, paint, or other residues, impacting the efficiency of the glue or adhesive that is used for the installation of the floor. If the surface is completely clean, the glue will work well and will prevent the pieces of the floor from coming off in the short or medium term.

Lack of Leveling and Conditioning Of the Space:

It is necessary to take the level of inclination of the floor into account; check if it has cracks. Make sure that it does not have any type of subsidence, as this would seriously affect the placement of the pieces and even cause them to break (in the case of some materials).

If you correct these errors before installation, you will achieve a level, harmonious and square floor. Our NYC handyman experts are right there for your help.

Not Following the Correct Installation Method:

The success of the flooring is determined by the correct installation methodology. If you install the floors first and then do veneer work on the wall, you run the risk of staining the floor or suffering a blow that damages its aesthetics.

When starting the floor installation work, you should be able to have the right tools. The amount of glue you use should cover 100% of the piece, paying special attention to the corners or edges. This measure prevents the piece from cracking in the future.

When the pieces are large, the recommendation is to apply double gluing, making sure to always apply the glue in the same direction, this will facilitate the exit of any air bubbles that have been trapped between the adhesive material of the sheet and soil.

Using the Wrong Adhesive:

There is an adhesive or glue made especially for each type of material.

According to the type of surface, floor, and material that you will use for the installation, you must choose the corresponding adhesive. Otherwise, you will observe in the short or medium term, how the pieces come off the floor easily.

On the other hand, said glue must be distributed and dispersed in the proper way (avoid only applying it in the center of each piece of the floor), without leaving any type of bubbles and maintaining the proper separation (generally recommended by the manufacturer of the pieces).

Installing in Low Light:

If you don’t have adequate lighting, especially when the work is done indoors or at night, it will be more difficult to detect imperfections (which you will be able to notice when the installation is finished). Having good lighting will allow you to identify faults more easily and quickly, immediately applying any necessary correction.

Skipping Important Steps:

Some flooring installations require a specific procedure. 

For example, in the case of radiant floors (such as electric or water radiant floors), the installation process deserves special attention to the details involved, a slight confusion in the order of the materials can ruin the whole job. 

However, in some cases, it is necessary to first make an underlayment and apply specific mixtures. A small error in these processes will be reflected in the final finish, characterized by cracks, sags, and an unwanted texture.

The installation of floors in the home, office, or commercial premises definitely poses its challenges, if you avoid the most common mistakes that are made during its installation, you will be able to have an attractive space that will create a positive impact. 

If you’re planning on giving your home an update by installing some new tiles, don’t let any of the above mistakes be your downfall. With the right planning, equipment, and our flooring installation tips you should have everything you need to pull off a stylish home update, whether you do this yourself or bring in the right handyman experts NYC

Leave a Comment