5 Simple Tips to Do Woodwork like a Pro

0 0 0 0 0

Wood WorkingIncorporate these woodworking tips to get a finish like a pro woodworker.

From carving a coaster to replacing the cabinet hinges, there are many woodworking tasks you can do it yourself, without requiring a professional.

Plus, you also get an opportunity to get creative.

As you are a naïve in woodworking, there are many rookie mistakes that can ruin your project. You can hurt your finger while drilling the nail or the glue comes out from the joint to the surface.

Luckily, you can avoid such rookie errors by implying some basics being used by pro woodworkers. What are those basic woodworking skills? Let’s check them out…

Make Safety Your Priority:

Make Safety Your Priority

Woodworks involve the use of tools like hammer, nails and blades which can harm your body. Even wood shavings and splinters can fly and enter your eyes. Therefore, make sure to wear all protective gear before involving into woodworks.

  • Wear safety glasses or goggles, or a face shield equipped with safety glasses or goggles. Regular eyeglasses don’t ensure good eye protection as wood dust may fly inside the frames and lenses.
  • Wear gloves to protect hands from splinters. Don’t wear them near rotating blades or other parts where they can catch.
  • Wear protective footwear if required.

Get Familiar with the Basic Hand Tools:

Basic Hand Tools

Most simple woodworking projects can be done with basic hand tools like saws, nails, screwdriver, hand saw and meter box. Even though there are some important things to look for while choosing tools for woodworks.

  • Prefer cross-cut hand saw as it goes with most of the simple projects.
  • The screw driver should match the screws you will use. Cross slot screwdriver generally fits into the heads of the most screws.
  • Metal 36” yardstick is an optimal ruler for a beginner.
  • Simple miter box is useful for measuring mitered corners of boxes or frames.

Use Tape to Prevent Glue Residue:

Tape for Glue Residue

Adhesive ooze from the joints can stain the surfaces. It leaves a residue that is a real challenge to remove. Here is a simple solution.

Clamp the pieces together using a tape on the joint, without using glue. Afterwards, cut it along with a sharp blade. Separate the pieces; and apply the glue. Clamp them together again. The tape will prevent the gushing of the glue out of the joints; and it won’t go to the wood. Remove the tape before the adhesive dries.

Use A Drafting Square for More Accuracy:

Drafting Square

True. Options are limited when it comes to finding an accurate square in the 2 to 3 feet range. Drywall squares are notorious for being inaccurate while it is not easy to work with a carpenter square. Here Drafting Square can help you. The reason is pretty simple—it is accurate and easy to use as the tape measure.

Use Hot Glue to Hold Small Stuff (Instead of Using Clamps):

Hot Glue Gun

Sometimes hot glue gun is effective than clamps when it comes to hold the smaller wooden pieces together. After sticking the pieces together, use a putty knife to remove the excess glue between the parts. Avoid using too much pressure as it can damage the piece.

With the help of these tips, you can accomplish most of the basic woodwork projects efficiently minimizing the rookie mistakes. However, consider professional handyman services like Hays NYC for large and complicated tasks.

Leave a Comment