Design your own Plumbing Pipe Headphone Stand

Subscribe
0 0 0 0 0

Designing a plumbing pipe headphone stand for your work space is a simple, cheap and easy. You can accomplish the project in less than one day and here’s what you need to do.

Plumbing Pipe Headphone Stand

If you’re up for DIY weekend and looking for step-to-step guide on designing your own plumbing pipe headphone stand, here’s how you can go about it:

Things You Will Need:

  • Five pipe pieces and washer
  • Screws and nuts
  • Drill and screwdriver

All requirements for the project will be available in your store room and toolbox. In case you don’t have them, you can easily buy them from any local home depot shop. They will not cost more than a few dollars.

With all things in hand, work on with the following step by step guide and you will design your plumbing pipe headphone stand is an easy and cheap manner.

Step 1

Opt for a location that you feel is appropriate and has the strength to bear those needed installations. A shelf or desk in your workspace is ideal for a headphone stand.

Step 2

Once you decide the location, check if the surface is strong enough to support the stand weight. After testing, mark four holes on the surface in a square pattern on the stand and drill them down.

Step 3

Assemble the pipes in a handle and secure the connection with adhesive. Fix the stand on the drilled platform and fasten it with the right pair of screw and nuts.

Step 4

When the stand is correctly fixed, just install the assembled pipe handle on the stand. Fasten the handle till it gets in desired direction and shape.


Courtsey: Instructables

  1. This design is steller! You obviously know how to keep a reader amused.
    Between your wit and your videos, I was almost moved to start my own blog (well, almost…HaHa!) Fantastic job.
    I really enjoyed what you had to say, and more than that, how you presented it.
    Too cool!

Leave a Comment